1993 Jeep Cherokee

Wheel Alignment

PRE-ALIGNMENT INSPECTION PROCEDURES

PRE-ALIGNMENT CHECKS

Before making wheel alignment adjustment, perform the following checks:

1. Tires should be equal in size and runout must not be
   excessive. Tires and wheels should be in balance, and inflated to
   manufacturer’s specifications.

2. Wheel bearings must be properly adjusted. Steering linkage
   and suspension must not have excessive looseness. Check for wear in
   tie rod ends and ball joints.

3. Steering gear box must not have excessive play. Check and
   adjust to manufacturer’s specifications.

4. Vehicle must be at curb height with full fuel load and
   spare tire in vehicle. No extra load should be on vehicle.

5. Vehicle must be level with floor and with suspension
   settled. Jounce front and rear of vehicle several times and allow it
   to settle to normal curb height.

6. If steering wheel is not centered with front wheels in
   straight-ahead position, correct by shortening one tie rod adjusting
   sleeve and lengthening opposite sleeve equal amounts.

7. Ensure wheel lug nuts are tightened to torque
   specifications.