MIRRORS - POWER

1988 Jeep Cherokee

1988 Power Mirrors JEEP

DESCRIPTION

Outside power rear view mirrors consist of door-mounted mirrors with internal motor drive and backing plate. The Ford electronic day/night mirror will change from normal to non-glare position when glare reaches mirror. The non-glare functions only at night.

TESTING

Mirror Motors & Switches

1. Ensure fuse is okay by operating interior lights. If
   neither mirror operates, check for battery voltage at power mirror
   switch assembly. Connect a voltmeter between terminal "G" (Red with
   White stripe) and ground. If battery voltage is present, connect
   voltmeter between terminals "G" and "F" (Black). If battery voltage is
   not present, check circuit at Red with White stripe wire and Black
   wire.

2. If one mirror does not operate, connect a voltmeter across
   power mirror switch assembly terminals. See Fig. 1. Voltage will be
   present when control switch and mirror select switch are operated for
   that motor.

Terminal Wire Colors	Motor	Voltage
A YEL and E BLUE	LH Mirror, Up-Down	Battery
 WHT and E BLUE	LH Mirror Left-Right	Battery
D YELW/TR and EBLU	RH Mirror, Up-Down	Battery
Ñ WHT W/TR and EBLU	RH Mirror, Left-Right	Battery

Fig. 1: Jeep Switch Assembly Check Chart Courtesy of American Motors/Jeep Corp.

3) If voltage is present but mirror does not operate, check motor and wiring. If voltage is not present when 2 switches are on,

replace switch assembly.